CH-1 Firmware Note: This firmware update is for the CH-1 only. CH-1 Firmware UpdatesNote: Several interim and beta versions were released between each major version listed below. Revision History Version 1.52d Drivers – Added a new BACnet/IP V2 driver. It is much faster than the original driver. It will request points from multiple devices simultaneously, and use ReadPropertyMultiple …
CH-1 Reset CH-1 Network Reset Procedure This procedure allows you to change the network settings of the CH-1 when you don’t know the current settings and cannot access the unit with a browser. 1) Get an empty USB flash drive. Any size will work. Skip to step 4 if you do not need to reset …
catnet CH-1 The CatNet CH-1 is no longer available. It has been superseded by the CatNet CH-2. The CH-2 has all the features of the CH-1 as well as a more modern interface. We still support existing CH-1 users. Please contact us if you have any technical questions. CH-1 Resources CH-1 Data SheetCH-1 Setup InstructionsDifferences …
CH-2 Differences Differences Between the CH-1 and CH-2 The CH-2 includes all of the features and functionality of the CH-1 and adds several new features, a much faster processor and more memory, as well as a new HTML5 mobile-compatible default interface. All CH-1 hardware interfaces are compatible with the CH-2, and CH-1 database backup files …
BACTrax Explorer BACTrax Explorer is a completely free to use BACnet explorer/network browser. It may be copied and given to anyone for personal or commercial use. It is currently in the beta testing stage and bugs may be encountered. This software is the explorer portion of an upcoming embedded BACnet front-end product, the BACTrax BT-1, …
Thanks For the latest news, product info and tutorial videos, check out these social media sites: Facebook Youtube Linkedin Thanks for contacting us! We will be in touch with you shortly.
Installation Software Installation Catalyst Pro and the Andover Programmers Toolbox are 32-bit Windows programs. They can be installed in Windows 10/11 by following these instructions: Install normally while logged on as administrator, or right-click theinstall program and select “Run as Administrator” Right-click the Catalyst Pro (or APT) icon and select “Properties”. Check the “Run as …
Legacy Products We never stop supporting our products. Below are our older products and files that may be needed to run or use them. See Installation instructions for help with installation in modern Windows computers. Please contact us if you have any questions about any of these products. Andover Programmers Toolbox (2002) APT is a terminal program specifically designed for …
Catalyst Pro Catalyst Pro is a Windows software package released in 2001. It was designed for use with Andover Controls devices but also integrates BACnet, LonWorks, ModBus and OPC devices in to a single user interface. It is no longer updated, but is still supported and still available for purchase. Please contact us for more …
CH-2 Firmware CH-2 Firmware Updates Version 2.20f Users: The admin username can now be changed. Trends: Trend export and email .csv files now show the point units. Trends: Each trend point will now store 20,160 readings, double the previous amount. Users: To conform with California Senate Bill 327, the ‘admin’ user is now forced to change …
